Your cigar lighter is an integral part of the smoking process, whether you have a torch lighter, dual torch or another type of lighter. However, lighter maintenance and troubleshooting should be part of your regular care regimen, in order to ensure that your lighter works properly every time. That said, some smokers are unaware of the importance of bleeding your lighter. Regularly bleeding your lighter will help ensure that your smoking experience is enjoyable.
Why does your lighter need to be bled? The bleeding process ensures that all old fuel and air within the fuel chamber are eliminated. This ensures that you have a smooth, even flame, without any fears of flares or sputtering. The bleeding process is simple and effective. Youll need only a single tool and a few safety steps to ensure your lighter is performing properly.
The first step is to hold the lighter vertically, with the bottom of the lighter facing upward. Do not hold the lighter near your face or your ears during this process. Now, locate the filler nozzle, which is the metal nipple on the bottom of the lighter through which fuel is added. Once you have located the nozzle, you will need a small screwdriver or another similar tool. Depress the nozzle with the tool and you will hear the hiss of escaping gas and air. Do not perform this operation near any open flame.
Hold the tool in place until the hissing sound stops. Remove the tool. Shake the lighter several times. Now, reinsert the tool and you will hear the hissing resume, though it will likely be lower in volume than before and will last for only a short time. Once the hissing stops for the second time, you can refill your lighter. To do this, simply keep the lighter inverted and use your filler canister to refill the lighter with fuel.
You should bleed your lighter whenever you notice that the fuel is becoming low. If your lighter does not have a means to check the fuel level, you will have to rely on the performance of the flame. Spitting or flaring are good signs that your lighter is nearing the empty mark and needs to be bled. Exercise care when bleeding and you will remain safe during this vital process.
Why does your lighter need to be bled? The bleeding process ensures that all old fuel and air within the fuel chamber are eliminated. This ensures that you have a smooth, even flame, without any fears of flares or sputtering. The bleeding process is simple and effective. Youll need only a single tool and a few safety steps to ensure your lighter is performing properly.
The first step is to hold the lighter vertically, with the bottom of the lighter facing upward. Do not hold the lighter near your face or your ears during this process. Now, locate the filler nozzle, which is the metal nipple on the bottom of the lighter through which fuel is added. Once you have located the nozzle, you will need a small screwdriver or another similar tool. Depress the nozzle with the tool and you will hear the hiss of escaping gas and air. Do not perform this operation near any open flame.
Hold the tool in place until the hissing sound stops. Remove the tool. Shake the lighter several times. Now, reinsert the tool and you will hear the hissing resume, though it will likely be lower in volume than before and will last for only a short time. Once the hissing stops for the second time, you can refill your lighter. To do this, simply keep the lighter inverted and use your filler canister to refill the lighter with fuel.
You should bleed your lighter whenever you notice that the fuel is becoming low. If your lighter does not have a means to check the fuel level, you will have to rely on the performance of the flame. Spitting or flaring are good signs that your lighter is nearing the empty mark and needs to be bled. Exercise care when bleeding and you will remain safe during this vital process.
About the Author:
Ryder is a consultant for an online specialty butane lighter store and has expert knowledge of cigar accessories, including torch flame lighters.
No comments:
Post a Comment